Quick Answer: What Does Joggle Mean?

What is a joggle in sheet metal?

A joggle is an offset formed to provide for an -overlap of a sheet or angle which is projecting in the same plane.

The inside joggle radii should be approximately the same as used for straight bending..

What is the synonym of joggle?

Synonyms & Near Synonyms for joggle. nock, punch, snip.

What is a joggle joint?

[′jäg·əl ‚jȯint] (civil engineering) In masonry or stonework, a joint between two blocks in which a projection on one fits into a recess in another.

What is K factor sheet metal?

In sheet metal, the K-factor is the ratio of the neutral axis to the material thickness. When a piece of metal is being formed, the inner portion of the bend compresses while the outer portion expands (see Figure 1).

What does a joggler do?

Also known as an edge setter or edge joggler. It looks like pliers. It’s not for people too lazy to make a patch that fits it just makes a recess for the patch to sit in so it still has to fit.

Which type of corner joint is the strongest welding?

open corner jointThe open corner joint (view C, fig. 6-19) is used on heavier sheets and plates. The two edges are melted down and filler metal is added to fill up the corner. This type of joint is the strongest of the corner joints.

What is the meaning of joggle in English?

verb (used with object), jog·gled, jog·gling. to shake slightly; move to and fro, as by repeated jerks; jiggle: She joggled the key in the lock a couple of times before getting the door open. to cause to shake or totter as by a sudden, slight push; jostle.

What does jogging my memory mean?

Definition of jog someone’s memory : to cause or help someone to remember something Maybe this photograph will jog your memory.

What does jiggling mean?

Meaning of jiggling in English to move from side to side or up and down with quick short movements, or to make something do this: If the door won’t open, try jiggling the key in the lock.

Why is it necessary to weld a tee joint on both sides?

If the thickness of the metal is such that complete fusion cannot be obtained by welding from one side, the joint must be welded from both sides. Most joints should first be tack-welded to ensure alignment and reduce warping. Figure 5-35.

What is a joggle in construction?

Joggle means to shake to and fro, to rock something about, and can be used both transitively and intransitively in several ways, including: to joggle along, walk along with short, jerky movements (Oxford English Dictionary, 2003) Joggle bending, a type of offset bend in construction.